Selling Complete Accessories for Liquefied Natural Gas Transport Vehicles, LNG Tank Truck Tail

• Customization: Available
• Loading Weight: 25T
• Material: 5083 Aluminium Alloy
• Overall Dimensions: (mm): 12000*2500*3800
• Tanker Body Dimension(mm): 11500*2480*2480
• Kingpin: Interchangeable 90# &50#
• Certification: CCC
• ABS: With ABS
• Tent Type: Simple
• Axle Number: 3
• Color: White
• Condition: New
• After-sales Service: Improve After-Sales Service
• Warranty: Lifetime Warranty
• Tire Number: 12
• Transport Package: Based on Customer′ S Request
• Specification: Tanker Body Dimension(mm): 11500*2480*2480
• Trademark: jinfeng
• Origin: China Shandong

Product Description

Product Description

LNG is the abbreviation for liquefied natural gas, and liquefied natural gas transport vehicles are abbreviated as LNG transport vehicles.

1.Under atmospheric pressure, the boiling point of LNG is around 162 ºC. At this low temperature, the density of LNG vapor is higher than that of ambient air. Usually, LNG is stored as a boiling liquid in an insulated storage tank, and any heat transferred into the tank will cause a certain amount of liquid to evaporate into gas. Generally, evaporated gas contains 20% N2, 80% CH4, and trace amounts of C2H6. When the evaporation temperature is below -113 ºC, its composition is almost pure CH4. When the temperature rises to -85 ºC or CH4 contains about 20% N22, in both cases, the evaporation gas density is greater than air. Under standard conditions, the density of evaporated gas is only 60% of that of air.

2. The density ratio of liquid to gas is 1 volume higher. The density of liquefied natural gas is approximately 600 times that of 1 volume of gaseous natural gas, which means that 1 volume of LNG can be roughly converted into 600 volumes of gas.
3.Under general combustible environmental conditions, clouds mixed with natural gas and air with a natural gas content in the range of 5% to 15% (volume fraction) can cause ignition, with a minimum lower flammable limit (LEL) of 4%. The natural gas in the free cloud cluster is in a low-speed combustion state, and the pressure formed inside the cloud cluster is less than 5kPa, which generally does not cause significant explosion hazards. But if the surrounding space is limited, there is a possibility of high pressure waves forming inside the cloud cluster.

Detailed Photos

 

Principles of LNG transportation
After transporting LNG from the gas source to the LNG supply station in the city, the tank truck's storage tank is pressurized to 0.6 MPa using the air temperature booster gasifier on the tank truck (or the tank truck is pressurized by the unloading booster gasifier set up inside the station). At the same time, reduce the pressure of the storage tank to about 0.4MPa, creating a pressure difference of about 0.2MPa between the tank truck and the LNG storage tank. Use this pressure difference to unload the LNG in the tank truck into the gas supply station storage tank. At the end of unloading, recover the natural gas from the tank truck through the gas-phase pipeline on the unloading platform.
Transport subject
The transportation carriers for liquefied natural gas (LNG) include liquefied natural gas tankers and tank containers, both of which have similar main structures. Tank containers are mainly used for multimodal transportation to facilitate tank loading and unloading. The products produced by professional manufacturers of liquefied natural gas transport tankers and tank containers are inspected in accordance with the requirements of the Safety Technical Supervision Regulations for Pressure Vessels, Low Temperature Insulated Pressure Vessels (GB 18442-2001), and Liquefied Natural Gas Tank Containers (JB/T4780-2002). The tank body is a high vacuum multi-layer insulated storage tank, and its insulation performance directly determines the pressure inside the tank. If the insulation performance is poor, the pressure inside the tank will be unstable, which will seriously affect the safety of transportation.
Analysis of the structure of liquefied natural gas tankers reveals that safety hazards mainly lie in the presence of a large number of valves and joints in the rear operating box, such as safety valves, liquid phase valves, vent valves, etc. These valves are directly connected to the tank. If any valve has a problem, it may cause leakage of liquefied natural gas.

Product Parameters

LNG Tank Semi Trailer
Material	5083 Aluminium alloy	Overall dimensions: (mm)	12000*2500*3800
Tanker Body Dimension(mm)	11500*2480*2480	Tare Weight(KGS)	6700
Axle	BPW 13T	Axle number	3 pieces
Tyre	315/80R22.5	Tyre number	13 pieces
Rim	9.0-20/13 pieces	Kingpin	Interchangeable 90# &50#
Landing gear	JOST C200	Suspension	German suspension
Leaf Spring	100mm*11mm*12PCS/6sets	Discharge valve	DN100 /1pieces
Fire extinguisher number	2	Spare wheel carrier	1 standard
Water tank	30L	Tool box	1 standard
Braking System	With WABCO ABS system	Electrical system	Standard electrical equipment

Our Advantages

 

Welcome to Liangshan Kunsheng Machinery Manufacturing Co., Ltd.

Discover our range of high-quality trailers with competitive factory prices. With over 20 years of partner experience, we guarantee excellence in every product. Our trailers are certified by SGS, CCC, and ISO for superior quality.

Enjoy comprehensive after-sales service and the option for customized products tailored to your needs. Our trailers have been exported to over 50 countries and regions, showcasing our global presence.

Choose us for lifelong trailer accessories and experience the difference with Liangshan Kunsheng Machinery Manufacturing Co., Ltd.

FAQ

Product Description

Welcome to Liangshan Kunsheng Machinery Manufacturing Co., Ltd.! We are pleased to offer you our top-quality products with excellent service. Below are some key details about our products:

• Shipping Conditions: We ship our trucks through roll on/roll off ships, bulk carriers, containers, etc.
• Payment Terms: T/T 30% as deposit, 70% before delivery. Photos of the product and packaging will be provided before final payment.
• Delivery Terms: We offer Factory price, FOB price, CFR price, CIF price.
• Delivery Time: Typically, it takes 10 to 20 days to receive the advance payment. The specific delivery time depends on the items and quantity in your order.
• Quality Assurance: We conduct 100% testing on all goods before delivery.
• Building Long-Term Relationships: We prioritize maintaining good quality and competitive prices to benefit our customers. We treat every customer as a friend and conduct business sincerely to establish lasting relationships.

For more information or to place an order, please contact us at Liangshan Kunsheng Machinery Manufacturing Co., Ltd. We look forward to serving you!