| Customization: | Available |
|---|---|
| Loading Weight: | 25T |
| Material: | Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LNG is the abbreviation for liquefied natural gas, and liquefied natural gas transport vehicles are abbreviated as LNG transport vehicles.
2. The density ratio of liquid to gas is 1 volume higher. The density of liquefied natural gas is approximately 600 times that of 1 volume of gaseous natural gas, which means that 1 volume of LNG can be roughly converted into 600 volumes of gas.
3.Under general combustible environmental conditions, clouds mixed with natural gas and air with a natural gas content in the range of 5% to 15% (volume fraction) can cause ignition, with a minimum lower flammable limit (LEL) of 4%. The natural gas in the free cloud cluster is in a low-speed combustion state, and the pressure formed inside the cloud cluster is less than 5kPa, which generally does not cause significant explosion hazards. But if the surrounding space is limited, there is a possibility of high pressure waves forming inside the cloud cluster.
Principles of LNG transportation
After transporting LNG from the gas source to the LNG supply station in the city, the tank truck's storage tank is pressurized to 0.6 MPa using the air temperature booster gasifier on the tank truck (or the tank truck is pressurized by the unloading booster gasifier set up inside the station). At the same time, reduce the pressure of the storage tank to about 0.4MPa, creating a pressure difference of about 0.2MPa between the tank truck and the LNG storage tank. Use this pressure difference to unload the LNG in the tank truck into the gas supply station storage tank. At the end of unloading, recover the natural gas from the tank truck through the gas-phase pipeline on the unloading platform.
Transport subject
The transportation carriers for liquefied natural gas (LNG) include liquefied natural gas tankers and tank containers, both of which have similar main structures. Tank containers are mainly used for multimodal transportation to facilitate tank loading and unloading. The products produced by professional manufacturers of liquefied natural gas transport tankers and tank containers are inspected in accordance with the requirements of the Safety Technical Supervision Regulations for Pressure Vessels, Low Temperature Insulated Pressure Vessels (GB 18442-2001), and Liquefied Natural Gas Tank Containers (JB/T4780-2002). The tank body is a high vacuum multi-layer insulated storage tank, and its insulation performance directly determines the pressure inside the tank. If the insulation performance is poor, the pressure inside the tank will be unstable, which will seriously affect the safety of transportation.
Analysis of the structure of liquefied natural gas tankers reveals that safety hazards mainly lie in the presence of a large number of valves and joints in the rear operating box, such as safety valves, liquid phase valves, vent valves, etc. These valves are directly connected to the tank. If any valve has a problem, it may cause leakage of liquefied natural gas.
| LNG Tank Semi Trailer | |||
| Material | 5083 Aluminium alloy | Overall dimensions: (mm) | 12000*2500*3800 |
| Tanker Body Dimension(mm) | 11500*2480*2480 | Tare Weight(KGS) | 6700 |
| Axle | BPW 13T | Axle number | 3 pieces |
| Tyre | 315/80R22.5 | Tyre number | 13 pieces |
| Rim | 9.0-20/13 pieces | Kingpin | Interchangeable 90# &50# |
| Landing gear | JOST C200 | Suspension | German suspension |
| Leaf Spring | 100mm*11mm*12PCS/6sets | Discharge valve | DN100 /1pieces |
| Fire extinguisher number | 2 | Spare wheel carrier | 1 standard |
| Water tank | 30L | Tool box | 1 standard |
| Braking System | With WABCO ABS system | Electrical system | Standard electrical equipment |
The frame is a through beam structure, and the longitudinal beam adopts a flat or gooseneck type, which is automatically submerged arc welded. The crossbeam is penetrated into the longitudinal beam and welded as a whole, with strong pressure bearing capacity.It has reasonable design, short discharge time, and discharge speed of 1.2-1.6tons/minute, which improves the volume utilization rate of the tank and reduces the residual ash rate by 0.2%.
1. Competitive factory prices and excellent quality.
2. Over 20 years of partner experience.
3. Product Quality Certification SGS CCC ISO.
4. Comprehensive after-sales service.
5. The customized products we offer.
6. Exported to over 50 countries and regions.
7. We can provide lifelong trailer accessories.
1,What are your shipping conditions?
Answer: Usually, we transport trucks through roll on/roll off ships, bulk carriers, containers, etc.
2,What are your payment terms?
Answer: T/T 30% as deposit, 70% before delivery. Before you make the remaining payment, we will show you photos of the product and packaging.
3,What are your delivery terms?
Answer: Factory price, FOB price, CFR price, CIF price
4,How is your delivery time?
Answer: Generally speaking, it takes about 10 to 20 days to receive the advance payment. The specific delivery time depends on the items and quantity in your order.
5,Do you test all the goods before delivery?
Answer: Yes, we conducted 100% testing before delivery.
6,How can you establish a long-term good relationship with our business?
Answer: 1. We maintain good quality and competitive prices to ensure that our customers benefit;
2.We respect every customer as our friend, no matter where they come from, we sincerely do business with them and make friends.
){kind=link}