| Customization: | Available |
|---|---|
| Loading Weight: | 25T |
| Type: | Frame |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Skeleton container transport vehicles are a type of semi-trailer frame for container transportation, and there is also a type of flatbed. The skeleton type vehicle is composed of longitudinal beams, crossbeams, and front and rear end beams welded together. The longitudinal beams are made of high-quality steel plate 16Mn, which is submerged arc welded into an I-shaped shape (with main dimensions of 450 and 500). The crossbeams are stamped into grooves using high-quality steel plates, and the front and rear end beams are welded rectangular cross-sections. The locking device of the middle container is equipped with an integral long crossbeam to improve the load-bearing capacity of the container locking device. The difference between flat panel and skeleton style lies in the addition of frames and patterned flooring. The frame of the wooden series container transport semi-trailer is completely shot blasted, and the entire frame is assembled and welded on a dedicated positioning platform. Its structure is reasonable, high in strength, and beautiful in appearance. A container compression device is installed on the frame, which can load two standard containers of 40 feet and 20 feet. The four container compression devices at the front and rear ends are fixed structures, and the middle container compression device is a concealed structure. When loading containers, the locking device of the middle container can be lowered below the level of the receiving platform as needed. Select mechanical load-bearing devices, mainly including Baohua 12T and 20T; Fuhua 13T; JOST; Equal types. Its function is to support the ground and withstand the front load of the semi-trailer when the traction device is detached from the trailer. There are two types of support devices, single action and linkage, mainly composed of support plates, screw transmission mechanisms, reduction boxes, and control handles. There are three types of suspension devices: single axle suspension and double axle suspension. The semi-trailer is equipped with two sets of spare tire racks, which are installed on the left and right sides of the trailer frame and equipped with spare tire elevators.
| Parameter configuration of skeleton semi-trailer | |||
| Rated load capacity: | 33700 | Total mass: | 39700 |
| Curb weight: | 6000 | Axles: | 3 |
| Wheelbase: | 7150+1310+1310 | Axle load: | -/23980 (with three axles installed) |
| Number of springs: | -/7/7/7/7 | Number of tires: | 12 |
| Tire specifications: | 11.00R2012PR, 12R22.512PR | approach departure angle: | -/17, -/15 |
| Front overhang and rear overhang: | -/1670, -/1970 | Rear wheelbase: | 1830/1830/1830 |
| Vehicle length: | 12490 | Vehicle width: | 2480 |
| Vehicle height: | 1640/1540, | cargo compartment length: | 605/1219 |
| Cargo compartment width: | 2440 | Cargo compartment height: | 2590 |
| Explanation: | 1. The vehicle adopts a "small goose neck" structure, and the frame height at the traction pin is 208 or 150 millimeters. It is used to transport a 40 foot container and can also transport a 20 foot container. 2. The difference in frame height at the traction pin leads to different vehicle heights, and optional installation without front end guide blocks, middle reinforced crossbeams, or rear platforms; The quality parameter changes caused by optional installation shall not exceed 3%. 3. The material used for side protection is Q235, and the connection between the side protection and the frame is bolted; The material used for the rear protection is Q345, which is connected to the frame by welding. The size of the rear protection section is 160 × 70 millimeters, with a ground clearance of 520 millimeters for the rear guard. 4. The manufacturer of ABS is Guangzhou Kemi Automotive Brake Technology Development Co., Ltd., and the ABS controller model is CM2XL-4S/2K. | ||
| Type | 3-axle skeleton semi-trailer | 3-axle skeleton semi-trailer | 3-axle gooseneck skeleton semi-trailer |
| Payload(kg) | 34200 | 34000 | 33500 |
| Gross weight(kg) | 40000 | 40000 | 40000 |
| Tare weight(kg) | 5800 | 6000 | 6500 |
| Overall dimension(L*W*H)(mm) | 12400*2500*1560 | 13000*2500*1560,2900 | 13000*2500*2900,2700,1560 |
| Axle space/Wheel base(mm) | 6830+1310+1310 | 7300+1310+1310 | 6830+1310+1310 |
| Tyre | 11.00R20 11.00-20 12R22.5 11R22.5 |
10.00R20 11.00-20 12R22.5 11R22.5 |
11.00R20 12R22.5 11R22.5 |
| Leaf springs | 10,4 | 10,7,8,air suspension | 10,4 |
| Rear axle location(mm) | 2550 2250 |
1680 1980 |
2150 2250 |
| King-pin locationmm | 1000 1300 |
1400 1100 |
1400 1300 |
1. Competitive factory prices and excellent quality.
2. Over 20 years of experience as a partner.
3. Product quality certification SGS CCC ISO.
4. Comprehensive after-sales service.
5. We offer customized products.
6. Exported to over 50 countries and regions.
7. We can provide lifetime partial accessories.
1,What are your shipping conditions?
Answer: Usually, we transport trucks through roll on/roll off ships, bulk carriers, containers, etc.
2,What are your payment terms?
Answer: T/T 30% as deposit, 70% before delivery. Before you make the remaining payment, we will show you photos of the product and packaging.
3,What are your delivery terms?
Answer: Factory price, FOB price, CFR price, CIF price
4,How is your delivery time?
Answer: Generally speaking, it takes about 10 to 20 days to receive the advance payment. The specific delivery time depends on the items and quantity in your order.
5,Do you test all the goods before delivery?
Answer: Yes, we conducted 100% testing before delivery.
6,How can you establish a long-term good relationship with our business?
Answer: 1. We maintain good quality and competitive prices to ensure that our customers benefit;
2.We respect every customer as our friend, no matter where they come from, we sincerely do business with them and make friends.
){kind=link}