| After-sales Service: | 36 Months |
|---|---|
| Warranty: | Lifetime Warranty |
| Type: | Frame |
| Certification: | CCC |
| Loading Weight: | 25T |
| ABS: | With ABS |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Introduction to the characteristics of hydraulic natural gas vehicle refueling stations:
1. Technical features:
(1) The CNG hydraulic refueling substation has a large refueling capacity, with a refueling capacity of no less than 2000Nm3/h.
(2) Low power consumption, the main motor power is 75KW, and the total system power does not exceed 80KW.
(3) There are few system equipment, and the main equipment is only the hydraulic substation pry body and CNG dispenser. The CNG dispenser adopts a single line double gun dispenser, which reduces the number of connecting pipelines and also reduces the number of pipeline connection points, resulting in a low possibility of air leakage; Lack of equipment foundation reduces civil engineering investment;
(4) The overall integration of CNG hydraulic gas station equipment is high, installation is convenient, and the equipment installation cycle is short.
(5) The CNG hydraulic refueling substation system always provides a relatively high and stable pressure medium to CNG, and the system operates with low vibration, while CNG always outputs single line to the refueling machine at a high working pressure, improving the refueling speed.
(6) The CNG hydraulic gas filling substation system has a high degree of automation. Except for the leakage alarm system that needs to be set separately, the control of other systems mainly relies on the PLC control system inherent in the hydraulic substation pry body. The start and stop of the hydraulic substation system are automatically controlled by the control system.
(7) The residual pressure of the CNG hydraulic refueling substation system during unloading is 1.0Mpa, and the unloading rate reaches 95%.
2. System features:
(1) Low operating and maintenance costs
The hydraulic gas filling substation system fully utilizes the relative incompressibility of liquids, and the unique full process non depressurization operation is the key to energy conservation. The installed power of the system is extremely small;
The hydraulic natural gas vehicle refueling substation system has a simple structure, high degree of automation, fewer equipment, fewer vulnerable parts, simple operation, and low system maintenance costs;
The hydraulic natural gas refueling sub station can charge natural gas into the vehicle cylinder at almost constant high pressure (20MPa) and almost room temperature, with fast inflation speed and a unloading rate of 95% for CNG transport vehicles, greatly improving the operational efficiency of the station;
(2) Small footprint
The hydraulic gas filling substation system is a pry mounted system with a compact structure and small footprint, which can eliminate the need for dedicated station buildings and surface gas cylinder groups, greatly reducing the actual footprint of station equipment. In areas of land scarcity in large and medium-sized cities, as well as in oil and gas co construction projects based on gas stations, its advantages are unparalleled;
(3) Fast installation speed
Due to the simplicity of the system equipment, easy installation, short construction period, and no need for specialized foundations, the civil engineering workload is small. Under the premise of meeting the requirements of supporting facilities, the installation and system debugging of the entire process equipment can be completed in 72 hours. The gas station can be quickly put into use, which can directly increase benefits for the enterprise.
(4) Strong environmental adaptability
The hydraulic natural gas vehicle refueling substation system has low equipment vibration. Due to the noise isolation structure adopted by the pry body, the equipment noise is less than 75dB (A), and it can work normally even in close proximity to residential areas without disturbing the people. It has advantages in site selection, and compared to the situation where the gas compressor used in traditional refueling substations has serious noise pollution, its environmental advantages are very significant. The sub station pry body is equipped with heating devices and air-cooled heat dissipation devices, matched with different hydraulic media, greatly expanding the range of environmental temperature adaptation.
2. Basic technical parameters table for hydraulic gas station trailer:
| Item (Tank) | Inner tank | Outer Shell | ||
| Working Pressure(MPa) | 0.64 | -0.1 | ||
| Design Pressure(MPa) | 0.64 | -0.1 | ||
| MDMT(ºC) | -196 | -40 | ||
| Working Temp.(ºC) | -162~-130 | -40~50 | ||
| Capacity (m3) | 52.5 | / | ||
| Service Fluid | LNG | / | ||
| Filling Weight (Kg) | 23000 | / | ||
| Air Tight Test Pressure (MPa) | 0.64 | Helium Mass Spectrometer Leak Detector | ||
| Insulation Type | High Vacuum Multilayer Insulation | |||
| Tare Weight (Kg) | 15100 | |||
| Payload(Kg) | 23000 | |||
| Full-load Weight(Kg) | 38100 | |||
| Speed Limit | Running (Km/h) | 60(Flat Ground),80(Highway) | ||
| Turning ((Km/h) | 20 | |||
| Wheelbase(mm) | 6800+1310+1310 | |||
| Tire Specification | 12R22.5 | |||
| Wheel Track(mm) | 1860 | |||
| Front/Rear Suspension(mm) | -/1950 | |||
1. Competitive factory prices and excellent quality.
2. Over 20 years of partner experience.
3. Product Quality Certification SGS CCC ISO.
4. Comprehensive after-sales service.
5. The customized products we offer.
6. Exported to over 50 countries and regions.
7. We can provide lifelong trailer accessories.
1,What are your shipping conditions?
Answer: Usually, we transport trucks through roll on/roll off ships, bulk carriers, containers, etc.
2,What are your payment terms?
Answer: T/T 30% as deposit, 70% before delivery. Before you make the remaining payment, we will show you photos of the product and packaging.
3,What are your delivery terms?
Answer: Factory price, FOB price, CFR price, CIF price
4,How is your delivery time?
Answer: Generally speaking, it takes about 10 to 20 days to receive the advance payment. The specific delivery time depends on the items and quantity in your order.
5,Do you test all the goods before delivery?
Answer: Yes, we conducted 100% testing before delivery.
6,How can you establish a long-term good relationship with our business?
Answer: 1. We maintain good quality and competitive prices to ensure that our customers benefit;
2.We respect every customer as our friend, no matter where they come from, we sincerely do business with them and make friends.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}